| Outer diameter | Inner Diameter | Thickness | ||
| Minimum | 15 mm | 8 mm | 0.2 mm | |
| Maximum | 1500 mm | 1300 mm | 50 mm | |
| Note | Above mentioned sizes is our standard range. Although, due to our manufacturing capacity and our in-board development team, we can manufacture other sizes as per requirement. | |||
| Cross-section | Inner Diameter | ||
| Minimum | 1.2 mm | 20 mm | |
| Maximum | 15 mm | 450 mm | |
| Note | Above mentioned sizes is our standard range. Although, due to our manufacturing capacity and our in-board development team, we can manufacture other sizes as per requirement. | ||
| Outer diameter | Inner Diameter | Length | ||
| Minimum | 15 mm | 8 mm | 20 mm | |
| Maximum | 1500 mm | 1300 mm | 75 mm | |
| Note | Above mentioned sizes is our standard range. Although, due to our manufacturing capacity and our in-board development team, we can manufacture other sizes as per requirement. | |||
| Material | Our standard usage of raw materials is Gujarat Fluorochemcials Limited (Inoflon), 3M (Dyneon), Itaflon S.R.L. (Itaflon), Daikin (Polyflon), and HaloPolymers (Fluoroplast). We can also offer other special grades as per requirements. |
| Filled Grades | We can manufacture Washers/O-rings/ Rings using the below mentioned list of filled grade:
· Glass fibre |
